Engineernig US

Solid State Plasma Light Sources have lifespan of 30,000 hr.

2008-11-20T08:54:14Z

LIFI® STA-40 Series includes model LIFI® STA-40-01 and LIFI® STA-40-02 suited for street, area, architectural and industrial lighting applications. Designed for street and area lighting, LIFI® STA-40-01 comes with efficacy up to 120 lumens/W. With color rendering up to CRI-96, model LIFI® STA-40-02 suits architectural applications. Both models are targeted at luminaire makers and lighting designers. This story is related to the following: Electrical Equipment and Systems...(read more)

Multi Material Cutter delivers 600 lb of cutting force.

2008-11-20T08:54:13Z

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat and ribbon cable, strapping, hosing and tubing. This story...(read more)

Switching Power Supply delivers up to 365 W.

2008-11-20T08:54:10Z

Measuring 3 x 5 in., HD365 series of high density AC/DC switching power supplies have power density of 18 W/in<sup>3</sup>. Four different models provide output voltages of 5, 12, 24 and 48 Vdc, all feature 85-264 Vac universal input, active power factor correction, and are protected against over-temperature, over-current and over-voltage conditions. Units have one main high-current output and also provide +5 V standby and isolated 12 V low current auxiliary outputs. This story is related...(read more)

LED Light Tubes fit into fluorescent lamp assemblies.

2008-11-20T08:54:10Z

Available in 10 models, LED-T8 light tubes accept input voltages of 90-240 Vac with 9-24 W of power consumption, depending on model. They are 25 mm in dia, with 4 models available at 580 mm length, 4 at 1,198 mm, and 2 models at 1,498 mm, while weight varies between 0.25-0.65 kg. Providing cool light within range of -20 to +40°C, different models offer brightness levels ranging from 480 lm at flux of 60 lm/W to 2,560 lm at 80 lm/W flux. This story is related to the following: Electrical Equipment...(read more)

P-Channel MOSFET has 0.4 mm profile.

2008-11-20T08:54:03Z

Offered in 1 x 1.5 x 0.4 mm WL-CSP to accommodate form factor requirements of cell phones, MP3 players, and other portable applications, FDZ391P P-Channel PowerTrench® MOSFET provides RDS (ON) of 74 m<font face='Symbol'>W</font> typical at -4.5 V VGS and power dissipation of 1.9 W. It utilizes lead-free terminals and is characterized for moisture sensitivity in accordance with Pb-free reflow requirements of J-STD-020. Product is also RoHS compliant. This story is related to the following:...(read more)

DC-DC Buck Converter supplies 600 mA for low output voltages.

2008-11-20T08:53:59Z

AS1324 delivers up to 600 mA from input voltage range of 2.7-5.5 V, making device suited for single Li-Ion cell or triple AA cell applications. Fixed output voltage versions 1.2, 1.5, and 1.8 of AS1324 require no external voltage dividers, reducing board space requirements, while adjustable variant allows externally set output voltage in 0.6 V to VIN range. Cconstant 1.5 MHz frequency switching results in low, predictable output noise that can be filtered. This story is related to the following:...(read more)

Power Supplies feature 8.5 W/cu-in. power density.

2008-11-20T08:53:51Z

Housed in 3U x 8HP enclosures, AC/DC Models cPCI-A-3U-300C and cPCI-A-3U 200C and DC/DC Model cPCI-D-3U-300C deliver continuous full power across -5 to +55°C operating range with airflows as low as 250 lfm. Models cPCI-A-3U-300C and cPCI-A-3U-200C are 200 and 300 W units, respectively with input voltage of 90-264 Vdc, while 300 W Model cPCI-D-3U-300C accepts 36-72 Vdc. All are hot-swap capable and offer standard CompactPCI output voltages of 3.3, 5, 12, and -12 V. This story is related to the...(read more)

Web Tension Controller optimizes product quality.

2008-11-19T08:42:54Z

Applied to running web, Double E/Re Integrated Tension System packages all electrical and pneumatic components needed to control product quality in one enclosure. Model EP.03 closed-loop tension control system can connect to new or existing pneumatic brakes and contains MW.90.10 controller, E/P converter, air pressure gages, and manual override dials. With 3 PID settings for acceleration, running, and deceleration, MW.90.10 can maintain consistent tension relative to line speed. This story is related...(read more)

Amplifier Chip boosts integrated car antenna performance.

2008-11-19T08:42:52Z

Targeted for in-glass, roof, or bumper antennas, automotive-qualified MT1119 enables multi-standard (AM, FM, HD-Radio(TM), DRM) car radio reception. It amplifies car radio signal, compensating for reduced performance of integrated antenna systems. Designed for single- or multiple-antenna systems, 4 x 4 mm RFIC also features temperature compensation to support ambient temperatures from -40 to +115°C. Another version, MT1120, suits applications with higher AM performance requirements. This story...(read more)

Upgrade Kit extends branch circuit monitoring capabilities.

2008-11-19T08:42:52Z

Providing 3 tiers of visibility within single unit, Energy Management System Upgrade Kit allows for power conditions to be monitored on individual breakers, breaker panels, or at equipment level. Single-panel unit monitors up to 42 circuits, while 2-panel unit monitors up to 84 circuits in standard, 3-phase panelboard. Through measurements, analysis, and notifications, data center and facilities managers can proactively manage energy consumption and optimize power distribution. This story is related...(read more)

LED Light Fixture suits high bay applications.

2008-11-19T08:42:52Z

Offering replacement for metal halide or high bay fluorescent fixtures, Constellation LED High Bay Luminaire features 20,000 lumen output, 360 W max power consumption, and over 50,000 hours of operating life. LEDs are fully dimmable and compatible with various controls, contain no mercury, are nearly unbreakable, and are free of flicker and buzz. Applications include industrial, commercial, warehouse, and retail spaces. This story is related to the following: Electrical Equipment and Systems Sponsored...(read more)

Circuit Protectors block transients via current disconnect.

2008-11-19T08:42:45Z

By using current disconnecting mechanism, Transient Blocking Units virtually eliminate latency and offer surge protection for sensitive electronic equipment within nanoseconds. Various series are available to provide wide bandwidth (3 GHz) circuit protection against lightning, power induction, power cross, and short circuit events in Ethernet, VoIP, Very High Speed DSL, general electronics, and Gigabit Passive Optical Networking applications. This story is related to the following: Electrical Equipment...(read more)

Quick-Connect Wiring System provides up to 18 A of power.

2008-11-19T08:42:44Z

M16 powerfast(TM) line includes 2-, 3- and 4-pin connectors and tees that provide up to 18 A in compact form factor for machine power distribution and motor control. Cordsets are offered with Tray Rated, exposed run PVC flexlife cable, and IP67 connectors are rated for 600 V. Tees are available with simple connectors or branches. Compliant with NFPA 79, products offer male or female options, straight connectors, standard and custom lengths, and pigtails or extensions. This story is related to the...(read more)

Diagnostic Kit troubleshoots and validates fieldbus segment.

2008-11-19T08:42:43Z

Assembled in portable case, Advanced Diagnostic Module Commissioning Kit contains Mobile Advanced Diagnostic Module, 120 V mA power supply, 25 V Fieldbus power supply, 120 Vac power cable, USB cable, and Fieldbus device cable with clip-on leads. Mobile ADM provides exact segment and individual device data needed for analysis of fieldbus physical layer, automatically generates network documentation for each segment and device, and enables personnel to pinpoint fault locations. This story is related...(read more)

Miniature Circuit Breaker is rated up to 125 A.

2008-11-18T08:41:40Z

Available in 1, 2, and 3 pole versions, NDM1-125 series high current circuit breaker is UL1077 recognized for use as supplemental protector. With 10 kA interrupt capacity, visual trip indicator, and compact DIN rail mount design, it is suited for applications where current protection ranging from 50-125 A is required. Product is available in industry standard C or D trip curves. This story is related to the following: Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For...(read more)