Topic reproduced from myElectrical’s old forums
03 October 2005, 18:52:04
Author: mustangSubject: berger lahr mp922Posted: 03 Oct 2005 at 10:52am
hi everyone,im new here and it looks an interesting site.
im stuck with an old berger lahr WDP5-118 possitioning unit for 5 phase stepper motor thats acting up,im getting a fault code that even berger lahr dont understand.the fault will not reset,they say i need a mp922 hand held programming unit,but that is so old nobody has one.....unless you guys no any different,or have you one in that old cupboard in workshop.
any suggestions please,thanks
18 October 2005, 06:56:24
Author: sparkySubject: berger lahr mp922Posted: 17 Oct 2005 at 10:56pmIt sounds like time to make a change out to another brand I prefer the Allen-Bradley line but there is many out there you could choose from. But even though I prefer the Allen-Bradley line they too have obsolete equipment such as SLC 100 and SLC 150 they were easy to work with and rather inexpensive but getting parts now is difficult so make sure you get something that will be around for awhile.
06 October 2006, 00:41:30
Author: stockySubject: berger lahr mp922Posted: 05 Oct 2006 at 4:41pm
Hello all,
I have 3 Berger Lahr WPD5-118 for sale if someone is in need.
Hello,
If you still have those WDP5-118 I'm intersted in buying them.
Fitulo
The Berger Lahr WDP5-118 product does not have to be programmed with the Sharp hand-held PC.
Many years ago Berger Lahr developed PC based software for programming these drives.
The software has been available for many years, so long ago that it is DOS based. However, it will operate from a windows 3.11, windows 95, or windows 98 based PC.
The software is know as Bpro/PC1 and is freely available from Berger Lahr.
However, Schneider Electric had purchased Berger Lahr over 7 years ago and Berger Lahr is quickly vanishing along with many of it's representatives. In fact, Berger lahr in Germany has even been renamed to Schneider Motion GMBH.
That being said, finding someone to supply this old software may be difficult.
I have worked as the sole service tech for Berger Lahr for over 12 years and can help with any and all Berger Lahr related support issues. I have been factory trained at Berger Lahr in Germany and I know every product they ever produced. Every one!
I stumbled across this post while poking around on the internet and found this worth replying to.
Feel free to contact me regarding this or any topic related to Berger Lahr products.
Make sure to include Berger Lahr in the subject so I don't dismiss the message as Spam. meritman@comcast.net
hi i would appreciate if you sell them to me
thank you in advance
there is a program called bpro you can download from www.sdt.se also i can send if you write me and send e-mail address
This software (Bpro3) can be applied to the WDP3-01x?
And where I can find the standard software (firmware from BERGER LAHR) for WDP3-01x?
Thanks